What to do if FujiFilm Printer does not function normally?
If your FujiFilm printer isn't working right, it might have a temporary glitch. Try pressing the reset button. Also, ensure the printer is charged.
Why is my FujiFilm instax mini Link Printer not charging?
If charging does not start on your FujiFilm printer, ensure that the USB power adapter plug is properly connected to the power outlet.
How to load film in FujiFilm instax mini Link Printer?
To load film into the FujiFilm printer: - Use FUJIFILM instax mini Instant Film (other films cannot be used). - Align the yellow mark on the film pack with the yellow alignment marker on the printer body, once aligned load the film into the printer.
Why does the FujiFilm Printer battery lose charge quickly?
If the FujiFilm printer battery loses its charge quickly, it could be because the battery is being used in a very cold environment. Keep the printer warm before printing.
Why are my FujiFilm instax mini Link prints white?
If some or all of the finished prints from your FujiFilm printer are white: - Do not open the film door until the film has been used up. - If the film door is opened with film remaining, the film will be exposed and become white.
Why FujiFilm instax mini Link charging does not start?
Make sure that the USB power adapter plug is properly connected to the power outlet to start charging your FujiFilm Printer.
Why tilting function of FujiFilm Printer does not work?
If the tilting function on your FujiFilm Printer does not work, confirm that [Camera operation settings] on the INSTAX Mini Link App is set to [ON].
Why I cannot reprint images on FujiFilm instax mini Link?
The stored image is deleted when the FujiFilm Printer is turned off.
Why are FujiFilm instax mini Link prints white?
If some or all of your FujiFilm Printer prints are white, it is likely because the film door was opened with film remaining, exposing the film. Do not open the film door until the film is used up.
Why does my FujiFilm Printer take too long to charge?
Charging your FujiFilm Printer may take longer at low temperatures.
Lists included items like USB cable and User's Guide.
Advises on proper disposal of the printer and its battery.
Explains LED indicators for battery level.
Explains LED indicators for charging status.
Details charging the printer using a PC.
Step-by-step guide to loading the film pack.
Guides first-time connection between printer and smartphone.
How to switch between Print and Fun modes using printer orientation.
General advice on maintaining the printer.
Details on charging the printer's battery.
Information on battery lifespan and recharge cycles.
Specific warnings about handling the battery.
Precautions to observe while printing is in progress.
Lists included items like USB cable and User's Guide.
Advises on proper disposal of the printer and its battery.
Explains LED indicators for battery level.
Explains LED indicators for charging status.
Details charging the printer using a PC.
Step-by-step guide to loading the film pack.
Guides first-time connection between printer and smartphone.
How to switch between Print and Fun modes using printer orientation.
General advice on maintaining the printer.
Details on charging the printer's battery.
Information on battery lifespan and recharge cycles.
Specific warnings about handling the battery.
Precautions to observe while printing is in progress.
The FUJIFILM instax mini Link is a smartphone printer designed to print images from your smartphone. It offers a range of features for both printing and interacting with the device through a dedicated app.
The primary function of the instax mini Link is to print photos from your smartphone onto INSTAX Mini Instant Film. It connects wirelessly to your smartphone via Bluetooth, allowing you to select and print images using the INSTAX Mini Link Smartphone App. The printer uses a 3-color exposure method with OLED technology to produce prints.
Before using the printer, ensure the built-in lithium-ion battery is fully charged. The battery is not removable and comes partially charged from the factory. Charging takes approximately 80 to 120 minutes using the supplied USB cable connected to a USB AC adapter (not included, typically supplied with your smartphone) or directly to a PC. You can print images while the printer is charging.
To use the printer, you must install the INSTAX Mini Link Smartphone App on your smartphone. For Android OS smartphones, search for the app in the Google Play Store (requires Android Ver. 5.0 or higher). For iOS smartphones, search in the App Store (requires iOS Ver. 10.0 or higher). System requirements may vary by smartphone model, so check the app download site for the latest information.
The printer uses FUJIFILM INSTAX Mini Instant Print Film only; INSTAX SQUARE Film or INSTAX WIDE Film are not compatible. To load film, slide and hold the film door lock, then open the film door. Insert the film pack, aligning the yellow marks on the pack with those on the printer. Close the film door. The black film protective cover will be automatically ejected. Do not open the film door until all film has been used, as this will expose and ruin the remaining film. Each film pack contains 10 film sheets and one black protective cover.
Press and hold the Power button for approximately 1 second to turn the printer on or off. The LED light will illuminate when the printer is on. If no operation occurs for about 10 minutes, the printer will automatically turn off.
The LED light on the printer indicates its status:
To reprint the last image, turn the printer over with the film ejection slot facing down and press the Power button. This function is unavailable if the app is in INSTAX Camera mode. The last printed image is deleted when the printer is turned off.
When linked with the app, you can control certain app functions by tilting the printer. Ensure "Camera operation settings" in the INSTAX Mini Link App is set to [ON].
Slide the film door lock and open the film door. Grasp the rectangular holes on the film pack and pull it out of the printer.
General| Color | Yes |
|---|---|
| Print technology | - |
| Maximum resolution | 318 x 318 DPI |
| Borderless printing | No |
| Time to first page (color, normal) | 12 s |
| Product color | White |
| Printing colors | Black, Cyan, Magenta, Yellow |
| Power source | Battery |
| Charging time | 2 h |
| Power consumption (printing) | 3 W |
| USB connector | Micro-USB |
| USB 2.0 ports quantity | 1 |
| Operating temperature (T-T) | 5 - 40 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Maximum input capacity | - sheets |
| Maximum print size | 2.4\ |
Weight and Dimensions| Depth | 34.6 mm |
|---|---|
| Width | 90.3 mm |
| Height | 124.5 mm |
To Next Page
