3
NA_EN
Before Use
Before using the printer, check to make sure you have the
following.
Supplied Accessories
• USB cable for charging (1)
(BOD700)
• User's Guide (1)
Notes on Disposing of the Printer
A built-in lithium ion battery is used for this printer.
When you dispose of the printer, follow your local regulations and
dispose of it properly.
For proper disposal in the United States at product end-of-life,
please contact 1-800-800-3854 Option #1 INSTAX.
Do not attempt to remove the built-in battery. Injury may result.
Read “IMPORTANT SAFETY NOTICE” (p. 13) for safety use.
Part Names
When you use the printer for the first time, be sure to fully
charge the battery.
Front
1
2
3
4
5
Rear
7
6
1 Film ejection slot
2 Power button/LED*
1
3 USB port cover
4 USB port
5 Reset button*
2
6 Film door lock
7 Film door
*1 For details on the LED indication, see pages 4 and 6.
*2 If the printer does not work properly, press the reset button to
reset the printer. Keep in mind the printer will not work properly
if the battery is not properly charged.
To Next Page
Loading...
