BIOS Recovery - Recovering System BIOS
20 - English A26361-D1555-Z120-1-6319
BIOS Recovery - Recovering System BIOS
i
All BIOS settings are reset to the default values.
Ê Open the casing as described in the operating manual.
Ê Set the switch for "Restore system BIOS" to ON.
Ê Close the casing as described in the operating manual.
Ê Insert a BIOS update floppy disk and start the PC.
Ê Note the signals issued from the loudspeaker. You have successfully restored the BIOS if you
hear the signal sequence “short-short- long- long- long" and the diskette access indicator is
dark. This can take a few minutes.
Ê Open the casing as described in the operating manual.
Ê Set the switch for "Restore system BIOS" to OFF.
Ê Close the casing as described in the operating manual.
Ê Remove the floppy disk from the drive.
Ê Start the PC and invoke BIOS Setup.
Ê Select the menu item Reset Configuration in the menu Advanced and change the setting to Yes.
Ê Save the change and terminate BIOS Setup.
The BIOS recovery has now been completed. The system restarts.
i
Detailed information on the BIOS recovery is contained in the manual "BIOS Setup"
("Drivers & Utilities" CD).
Microcode Update
What is a microcode update?
Da es für Prozessoren keine Treiber gibt , bietet Intel ab den Prozessoren der P6-Familie (Pentium
Pro) die Möglichkeit, den Befehlssatz (Microcode) des Prozessors zu aktualisieren. This enables
minor errors to be corrected and the performance to be increased.
To guarantee the best possible performance and error-free operation, Intel recommends updating
the microcode for every new processor. Intel refers to the use of the processor without microcode
updates as operation outside the specifications.
To Next Page
Loading...
