APM and ACPI system status, energy-saving modes
A26361-D1555-Z120-1-6319 English - 23
APM and ACPI system status, energy-saving modes
System status ACPI
Status*
APM
Status
Power
LED
Power
consumptio
n
Wake-up time
Normal
operation
G0 S0 On To Normal
Simple energy-
saving mode
S1 Standby Almost like
normal
Almost
immediately
Maximum
energy-saving
mode **
"Save to DRAM"
S3
flashing
RAM,
wake-up
components
ca. 5s
Maximum
energy-saving
mode **
"Save To Disk"
G1
S4 Wake-up
components
ca. 20s
“Soft Off" G2 S5 Soft Off Nearly zero Full boot time
Mechanically Off G3 Off
Off
Zero Full boot time
* G = Global status; S = System status
** The power supply unit must provide sufficiently loadable 5 V standby voltage.
To use the WOL functionality the power supply must provide a 5 V auxiliary voltage (5V SB) of at
least 1 A.
To Next Page
Loading...
