To Next PageTo Next PageWhat to do if my Fujitsu Siemens Computers Monitor says 'No Video Input'?
If your Fujitsu Siemens Computers Monitor displays the message 'No Video Input', first ensure that the data cable is securely connected to the monitor port on your computer. Also, verify that your computer is powered on.
Why is my Fujitsu Siemens Computers Monitor not displaying anything, but the power light is on?
If your Fujitsu Siemens Computers Monitor screen is not displaying anything, but the power indicator is lit, try the following: First, ensure that your computer is switched on. Next, check that the monitor's data cable is correctly attached to the computer. If that doesn't work, press any key on the keyboard in case the computer is in energy-saving mode. Finally, adjust the brightness and/or contrast settings until a picture appears.
How to fix a Fujitsu Siemens Computers Monitor picture that is too light or too dark?
If your Fujitsu Siemens Computers Monitor picture is too light or too dark, try the auto-adjustment function of the monitor (using the AUTO button, if available, or through the OSD menu). If the result is still not satisfactory, manually adjust the contrast and brightness settings using the OSD menu.
Why is the picture shaking on my Fujitsu Siemens Computers Monitor?
If the picture on your Fujitsu Siemens Computers Monitor is shaking, first check that the data cable is correctly attached to the monitor port on the computer. If the issue persists, perform the auto-adjustment of the monitor, either using the AUTO button (if present) or through the OSD menu.
Why does my Fujitsu Siemens Computers Monitor have no screen display and the power indicator is off?
If your Fujitsu Siemens Computers Monitor shows no screen display and the power indicator is also off, ensure the monitor is switched on and that the power cable is correctly connected. Also, check that the computer itself is switched on.
How to correct the picture position on my Fujitsu Siemens Computers Monitor?
If the picture position on your Fujitsu Siemens Computers Monitor is not correct, perform the auto-adjustment of the monitor using either the AUTO button (if available) or through the OSD menu. If needed, you can also manually set the picture position using the OSD menu.
General| Brand | Fujitsu Siemens Computers |
|---|---|
| Model | L22W-6SA |
| Category | Monitor |
| Language | English |
Essential safety information for operating the monitor.
Troubleshooting steps when the power indicator is off.
Troubleshooting steps when the power indicator is on but no display.
Resolving the 'No Video Input' message on the monitor.
Resolving issues with a shaking or unstable picture.
