Fujitsu Siemens Computers SCENICVIEW P17-2

Questions and Answers

S
Scott KingAug 16, 2025
What to do if my Fujitsu Siemens Computers Monitor has no screen display but the power indicator is on?
- C
  Charlotte AveryAug 16, 2025
  If your Fujitsu Siemens Computers Monitor shows no screen display but the power indicator is lit, first ensure that your computer is powered on. Also, check if the monitor's data cable is correctly connected to the computer's port. Try pressing any key on the keyboard, as the computer might be in energy-saving mode. If the issue persists, adjust the brightness and contrast settings until a picture appears.
J
Jasmine WilkersonAug 19, 2025
Why does my Fujitsu Siemens Computers Monitor say 'No Signal'?
- J
  Jamie HallSep 12, 2025
  If your Fujitsu Siemens Computers Monitor displays the message 'No Signal', verify that the data cable is securely connected to the monitor port on your computer. Also, ensure that your computer is switched on.
J
Julie PhillipsAug 22, 2025
How to fix a Fujitsu Siemens Computers Monitor with no screen display and no power light?
- M
  michael98Aug 22, 2025
  If your Fujitsu Siemens Computers Monitor has no screen display and the power indicator does not light up, make sure the main switch at the rear of the monitor is turned on. Check that the power cable is correctly connected to the monitor, and confirm that the computer is switched on.
S
Stephanie AlvarezAug 25, 2025
What to do if Fujitsu Siemens Computers Monitor picture is shaking?
- K
  Kimberly SimpsonAug 26, 2025
  If your Fujitsu Siemens Computers Monitor's picture is shaking, check that the data cable is correctly attached to the monitor port on the computer. If the issue continues, press the EXIT/AUTO button to perform the auto-adjustment of the screen.
M
mrichardsonAug 28, 2025
Why does my Fujitsu Siemens Computers Monitor say 'Frequency out of range'?
- J
  Joseph MartinAug 28, 2025
  If your Fujitsu Siemens Computers Monitor displays the message 'Frequency out of range', it means the input signal doesn't match the monitor's technical data. Adjust the video frequency range using your computer's software or graphics card settings. Alternatively, adjust the screen resolution using your computer's software or screen controller settings.
B
Briana Anderson MDAug 31, 2025
How to correct the picture position on my Fujitsu Siemens Computers Monitor?
- J
  jonesmarisaAug 31, 2025
  If the picture position on your Fujitsu Siemens Computers Monitor is not correct, press the EXIT/AUTO button to perform the auto-adjustment of the screen. This is because the monitor might be recognizing an undefined mode.
S
scotthernandezSep 3, 2025
What to do if my Fujitsu Siemens Computers Monitor picture is wrongly adjusted?
- J
  Jonathan TorresSep 3, 2025
  If the picture on your Fujitsu Siemens Computers Monitor is wrongly adjusted, press the SELECT/MENU button to activate the function Factory Recall. The Auto Processing message will be displayed.
H
Heather GonzalezSep 6, 2025
How to fix vertical lines on my Fujitsu Siemens Computers Monitor by Fujitsu Siemens Computers?
- B
  bsampsonSep 6, 2025
  If you are seeing picture disturbances in the form of vertical lines on your Fujitsu Siemens Computers Monitor, press the EXIT/AUTO button to perform the auto-adjustment of the screen.
D
Daniel LewisSep 9, 2025
How to resolve horizontal lines or noise on my Fujitsu Siemens Computers Monitor screen?
- K
  kimberlyowenSep 9, 2025
  If you notice picture disturbances like horizontal lines or picture noise on your Fujitsu Siemens Computers Monitor, press the EXIT/AUTO button to perform the auto-adjustment of the screen.
J
Janice RobertsSep 12, 2025
Why is my Fujitsu Siemens Computers Monitor screen becoming darker?
- C
  Christopher ObrienSep 12, 2025
  If the screen of your Fujitsu Siemens Computers Monitor becomes darker, it is because the background lighting has a limited lifetime. If your monitor display should become too dark, the background lighting will have to be exchanged. Please contact our help desk.