Using the Display
Turning On the Display
Turn on the display before turning on the computer. When the power is on, the LED on the power
button lights green and the screen image will appear after about 10 seconds. If the LED doesn’t light
green or no image appears, please verify if the display is properly connected.
Function Controls
1,2
< >
Hot key
&
Left / Decrease &
Right / Increase
OSD Off: Press
< open “BRIGHTNESS” and “CONTRAST”
menu.
Press
> directly to adjust the volume.(only
monitors with audio input)
OSD On: Use these buttons to select or adjust the values of
the selected function.
3
MENU
Hot key
&
SELECT
OSD Off: Open OSD
OSD On: Select function. (submenu)
4
AUTO
Hot key
&
EXIT
OSD Off: Auto adjustment function.
OSD On: Exit OSD.
5
POWER
Power Switch
Power On/Off
Blue-Operation mode / Orange-Power saving mode
Downloaded from ManualMonitor.com Manuals
To Next Page
Loading...
Need help?
General
