6. Specify the created batch profile, and then perform the batch scan.
For how to perform the batch scan, see "
Batch Scan" in Section "2.6 How to Use ScandAll PRO."
HINT
When storing each of the scanned documents separated with barcode-printed sheets in
separate folders, and naming the folders with barcode recognition result strings, change the
settings in the [Name Rule] dialog box opened by clicking the [Name Rule] button on the
[File format and Name scheme] tab.
Select the [Use Barcode Characters] radio button, and mark the [Create Directories
Separately] checkbox in the [Name Rule] dialog box.
file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/03/c03_17_01.htm (4 of 6)9/28/2007 2:39:16 PM
To Next Page
Loading...
