7. Close the ADF. Press down on the center of the ADF to return it to its original position until the ADF
button locks.
With the movie below, review the procedure to replace the Brake roller.
8. Reset the Brake roller counter.
For how to reset the Brake roller counter, see Section "
5.2 How to Check and Reset the Consumables Counters."
All Rights Reserved. Copyright 2007 © PFU LIMITED
file:///D|/Documents%20and%20Settings/scanner/Desktop/Lynx3/06/contents/EN/05/c05_03_01.htm (3 of 3)9/28/2007 2:39:28 PM
To Next Page
Loading...
Need help?
General