Fujitsu 68.6 cm (27") - OSD Settings and Adjustments; Input and Mode Selection; Brightness and Auto-Adjustment

OSD description
Input function definition
The OSD shows the current input source. The input source can be selected by the keys V and U .
To apply the selected input source, press the 9 key.
To discard the changes, press the 2 key.
Mode function definition
The OSD shows the current mode selection. The mode can be selected with the keys for U and V.
Example of mode selection
To apply the selected mode, press the 9 key.
To discard the selection, press the 2 key.
Brightness Function Definition
The OSD shows the current status of brightness. The brightness can be adjusted with the keys for “-
” and “+“.
Example of brightness adjustment
Performing auto-adjustment of the monitor
► Press the AUTO button for approx. 1 second while the OSD menu is switched off.
The Auto Processing message is displayed.
Picture quality and position are set to optimum values for your system.