OSD description
Locking the OSD menu
The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.
► Press and hold the sensor key
for a few seconds while you switch on the monitor with
the ON/OFF switch.
A message is displayed that the action has been performed.
Please proceed in the same manner to release the locked OSD menu again.
Locking the ON/OFF button
The ON/OFF switch can be locked to prevent accidental or unauthorised changes to the monitor
settings.
► Press and hold both buttons ECO and Input key simultaneously for a few seconds.
A message is displayed that the action has been performed.
Please proceed in the same manner to release the locked ON/OFF switch again.
Monitor settings using the OSD menu
With the buttons on the control panel, call up and use the integrated OSD (On-Screen display) menu.
i
The OSD menu is available in different languages. The English menu names are used in
the following description (default setting). With the OSD function Language in the OSD Setup
you can select another language.
Language selection
After turning on the Display the first time, a language selection will appear.
X Please select a language.
To set the OSD menu, perform the following steps:
► Press the MENU button to activate the OSD menu.
The active menu level shows a bright background and a blue coloured cursor bar. The inactive menu
level areas show the grey background.
The first symbol (Brightness/ Contrast) is blue coloured. In the right-hand part of the Display the
associated functions are shown.
► If necessary, press the
6
or
5
button to mark another icon (e.g. Image adjust).
To Next Page
Loading...
