Fujitsu AB*G14LVTA - Page 173

- (01-169) -
MULTI TYPE 2, 3, 4 ROOMS TYPE MULTI TYPE 2, 3, 4 ROOMS TYPE
FUNCTION SETTING

3) Select the [Function No.] by pressing the [Cursor button (Left/Right)], and select the
Function No. to be set by pressing the [Cursor button (Up/Down)].
C
ancel
:
OK:
Function setting
Mo
10:00AM
R.C. Function Setting
address No. No.
Version Error history
00 30 00
4) Select the [Setting No.] by pressing the [Cursor button (Left/Right)], and select the Setting
No. to be set by pressing the [Cursor button (Up/Down)].
C ancel : OK:
Function setting
Mo
10:00AM
R.C. Function Setting
address No. No.
Version Error history
00 30 01
5) Pressing the [Enter button], conrm the setting.
(The data will be transferred to the indoor unit.)
C ancel : OK:
Function setting
Mo
10:00AM
R.C. Function Setting
address No. No.
Version Error history
00 30 01
C ancel : OK:
Function setting
Mo
10:00AM
R.C. Function Setting
address No. No.
Version Error history
00 30 - -
C ancel : OK:
Function setting
Mo
10:00AM
R.C. Function Setting
address No. No.
Version Error history
00 30 01
GOOD
ERROR
When the data was not set up on the indoor ●
unit "--" is displayed.
Set up the data again according to the ●
procedure in step 3), 4) above.
When the data was correctly set up on the indoor
unit
(Flashing display changes to illuminated display.)
FUNCTION DETAILS

Refer to 13-5. FUNCTION DETAILS