To Next PageTo Next Page
Need help?Do you have a question about the Fujitsu AOTG60LATT and is the answer not in the manual?
General| Cooling Capacity | 6.0 kW |
|---|---|
| Heating Capacity | 7.0 kW |
| Refrigerant | R32 |
| Operating Temperature (Cooling) | -10 to 46 °C |
| Operating Temperature (Heating) | -15 to 24 °C |
| Indoor Unit Dimensions (WxHxD) | 998 x 320 x 238 mm |
| Type | Split Air Conditioner |
Controls compressor frequency based on room and outdoor temperature.
Controls compressor frequency based on room and outdoor temperature for heating.
Automatically switches operation mode based on temperature changes.
Details indoor fan speed settings for various operation modes.
Defines compressor operation frequency ranges and start-up control.
Explains ON/OFF, Program, and Sleep timer functions for remote controllers.
Describes protection controls for discharge gas temp, compressor temp, and low pressure.
Explains display unit layout, LED indicators, and data display modes.
Lists error codes and blinking patterns for indoor and wired remote controller displays.
Provides step-by-step troubleshooting for specific error codes.
Offers troubleshooting steps for issues like no power or voltage drops.
Details diagnostic methods for compressor and other parts.
Instructions for removing the service panel from the unit.
Guide for removing the insulation sheet from the unit.
Steps for removing the main PCB unit.
Procedures for removing various PCBs like Inverter, PFC, Filter, and Capacitor.
Instructions for removing the fan motor assembly.
Detailed steps for removing the compressor, including precautions.
Safety and procedural precautions for handling refrigerant cycle parts.
