En-15
8.2. Installation work
WARNING
• Disconnect the power supply or turn o the breaker before starting work. Failure to
disconnect the power supply may lead to electric shock or re.
• Do not turn on the power until all installation work is complete.
• Use the accessories or specied connection cables.
Do not modify connection cables other than those specied, do not use extension
cords, and do not use independent branch wiring. The allowable current will be ex-
ceeded and cause electric shock or re.
• When installing this product, make sure that there are no children nearby. Otherwise,
injury or electric shock could result.
CAUTION
• Discharge static electricity on your body before starting work. If static electricity is not
discharged, there is a risk that the board parts may be damaged.
• When performing wiring work, be careful not to damage the cable or injure yourself.
Also, connect the connectors securely. Loose connectors will cause trouble, heating,
re, or electric shock.
• Perform wiring so that water does not enter this unit along the external wiring. Always
install a trap to the wiring or take other countermeasures. Otherwise it will cause trou-
ble or electric shock or re.
• Do not touch the circuit board and circuit board parts directly with your hands. Other-
wise, injury or electric shock could result.
This manual indicates the procedure to install and set up the WLAN adapter.
In addition, we provide online content on our website.
Product information page for AIRSTAGE Mobile
This web page instructs the feature of AIRSTAGE Mobile and the URLs for downloading
the mobile app.
www.fujitsu-general.com/global/products/airstagemobile/index.html
To Next Page
Loading...
