En-5
Press the DAY (DAY OFF) button and SET button simul-
taneously for 2 seconds or more to activate the child lock
function and lock all buttons on the remote controller.
Press the buttons again for 2 seconds or more to deacti-
vate the child lock function.
When the child lock function is activated, the
mark
appears. If any button is pressed during the child lock, the
CL display and fl ash.
Press the ECONOMY button for more than 2 seconds to se-
lect whether the room temperature is detected at the indoor
unit (remote sensor) or the remote controller.
When the
thermo sensor display appears, the room
temperature is detected at the remote controller.
NOTES
• This function is locked at the factory. In order to detect the room temperature correctly, consult authorized service
personnel when using this function.
• If this function is locked, the location where the room temperature is detected cannot be changed and the
mark fl ashes when the ECONOMY button is pushed for 2 seconds or more.
Indoor unit
Room temperature sensor selection
OPERATION
Child lock function
To Next Page
Loading...
Need help?
General
