To Next PageTo Next Page
Need help?Do you have a question about the Fujitsu ASU9R2 and is the answer not in the manual?
General| Type | Split System |
|---|---|
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R32 |
| Indoor Unit Weight | 9 kg |
| Noise Level (Indoor) | 21 dB |
Details electrical parameters for indoor and outdoor units, including voltage, current, and power.
Provides information on compressor type, refrigerant details, and charge quantities.
Lists the weight specifications for the indoor and outdoor units.
Details the noise levels for indoor and outdoor unit operation.
Illustrates the physical dimensions of the indoor unit with measurements.
Shows the physical dimensions of the outdoor unit with measurements.
Diagram illustrating the evaporator and connecting pipes within the indoor unit.
Diagram showing the compressor, condenser, valves, and refrigerant flow in the outdoor unit.
Detailed schematic of the indoor unit's printed circuit board and its connections.
Detailed schematic of the outdoor unit's printed circuit board and its connections.
Error codes and indications for communication failures.
Details thermistor errors for both indoor and outdoor units.
Covers errors related to indoor/outdoor PCBs and indoor fan motor RPM issues.
Indicates abnormal power supply and model distinction errors.
Lists components associated with the front panel assembly of the indoor unit.
Details parts related to the control box of the indoor unit.
Lists components making up the casing of the indoor unit.
Details the parts that constitute the evaporator assembly of the indoor unit.
Lists major outdoor unit parts like panels, emblems, and cabinets.
Details outdoor unit parts including valves, solenoid, and thermistor.
Lists outdoor unit electrical parts like PCB, relay, and housing components.
Lists accessories for indoor unit installation like wall hooks and screws.
Details accessories for operating the unit, such as remote control and batteries.
