16-6. Function details
¢
Contents of function setting
Each function setting listed in this section is adjustable in accordance with the installation environ-
ment.
NOTE: Setting will not be changed if invalid numbers or setting values are selected.
Function setting list
Function
no.
Functions
Compact
cassette
Slim duct
Wall mounted
Floor
RLF1 LPAS
1) 11 Filter sign ● ● ● ● ●
2) 20 Ceiling height ● — — — —
3) 22 Outlet directions ● — — — —
4) 23
Vertical airflow direction
range control
— — — — ●
5) 26 Static pressure — ● — — —
6) 30/31
Room temperature control
for indoor unit sensor
● ● ● ● ●
7) 35/36
Room temperature control
for wired remote controller
sensor
● ● — ● —
8) 40 Auto restart ● ● ● ● ●
9) 42
Room temperature sensor
switching
● ● ● ● ●
10) 44
Remote controller custom
code
● ● ● ● ●
11) 46 External input control ● ● ● ● ●
12) 48
Room temperature sensor
switching (Aux.)
● ● ● ● ●
13) 49
Indoor unit fan control for
energy saving for cooling
● ● ● ● ●
14) 60
Switching functions for
external output terminal
● ● — ● —
15) 61
Control switching of
external heaters
● ● — ● —
16) 62
Operating temperature
switching of external
heaters
● ● — ● —
17) 66
Outdoor temperature zone
boundary temperature A
● ● — ● —
18) 67
Outdoor temperature zone
boundary temperature B
● ● — ● —
19) 71
Standby time for auxiliary
equipment operation
● ● — ● —
20) 72 Heat pump backup setting ● ● — ● —
21) 73
Emergency heat for
external output terminal
● ● — ● —
22) 74 Fan delay time — ● — — —
23) 75
External heater use in
defrosting
● ● — — —
24) 92/93
Room temperature control
for wired remote controller
sensor
— — ● — ●
25) 95
Heat insulation condition
(building insulation)
— — ● ● ●
- 206 -
16-6. Function details 16. Function settings
MULTI-SPLIT TYPE
5-unit type
MULTI-SPLIT TYPE
5-unit type