Fujitsu ASYA24LCC - Page 26

Cooling mode / Dry mode / Fan mode( )
Heating mode / Fan mode( )
(2). SWING OPERATION
When the swing signal is received from the remote controller, the vertical louver starts to swing.
(Swinging Range)
When the indoor fan is at S-Lo or Stop mode, the swinging operation is interrrupted
and it stops at either right end or left end.
05-09
1
3
1
4
4
6
3 6
To select Vertical Airflow Swing Operation
To select Horizontal Airflow Swing Operation
When the swing signal is received from the remote controller, the horizontal louver starts to swing.
All mode :
(Swinging Range)
5
1
When the indoor fan is S-Lo or Stop mode, the swinging operation is interrrupted
and it stops at either upper end or bottom end.
To select Vertical and Horizontal Airflow Swing Operation
When the horizontal swing signal is input from remote control, the combination of the vertical
and horizontal swing operation is performed.