Fujitsu ASYG14LTCB - Wireless Remote Controller; Program Timer; Sleep Timer

-
(
01 - 04
)
-
WALL MOUNTED TYPE AS

G09-14LT
WALL MOUNTED TYPE AS

G09-14LT
WIRELESS REMOTE CONTROLLER2.
FEATURES

3 Mode timer setup

(Weekly / Program / Sleep) are possible.
Easy operation.

Easy to change signal code (4 patterns) by button operation.

Built-in timers

Select from Three different timer programs (Weekly / Program / Sleep).
Weekly timer

Weekly timer can be easily set by wireless remote controller.
ON, OFF can be set up to 4 times in 1 day and up to 28 times in 1 week.
Program timer

The program timer operates the on and off timer once within a 24 hour period.
Sleep timer

The sleep timer function automatically corrects the temperature thermostat setting according to
the timer setting to prevent excessive cooling and heating while sleeping.
60
min
.
1
°
C
2 °
C
Timer setting
1
°
C
30
min
.
60
min
.
90
min
.
2
°
C
3
°
C
4 °
C
Timer setting
Cooling operation/dry operation
When the sleep timer is set, the set temperature
automatically rises 1 °C every hour. The set
temperature can rise up to a maximum of 2 °C.
Heating operation
When the sleep timer is set, the set temperature
automatically drops 1 °C every 30 minutes. The set
temperature can drop to a maximum of 4 °C.
Simple function setting

Setting of the air conditioner selection function is performed by remote controller.
Switching remote controller signal code

AB C D
AB
C
D
Mixed-up
I.U. I.U. I.U. I.U.
I.U. I.U. I.U. I.U.
After code change
Code selector switch eliminates unit
•
being wrongly switched.
(Up to 4 codes can be set.)
*I.U.=Indoor unit