Removing and installing components
during servicing
Attaching the cover
2
2
1
► Place the cover
in the correct mounting position (1).
► Tighten the screws (2).
► Re-fasten the
cover of the memory service compartment; see "
Attaching the cover", Page 66.
Finishing component removal
After you have removed or changed the system components as you required, please
prepare your device for operation again as follows:
► Install the battery again (see "
Installing a battery", Page 34).
► Turn the n
otebook the right way up again and place it on a flat surface.
► Reconnect the cables that you disconnected before.
Fujitsu 73
To Next Page
Loading...
