Installing/removing the processor
English - 5
Installing/removing the proc
essor
Disconnect the system from the mains voltage before performing any of the tasks
described below. Details are contained in the operating manual of your system.
Technical data
• Sockel LGA 1155, max. 95
W
• A current list of the processors supported by this mainboard i s available on the
Internet at: "
http://www.fujitsu.com/fts/products".
Never touch the underside of the processor. Even minor soiling such as grease
from the skin can impair the processor’s operation or destroy th e processor.
Place the processor in the socket with extreme care, as the spring contacts
of the socket are very delicat e and must not be bent.
If one or more spring contacts are bent, on no account insert the processor a s it
may be damaged by doing so. Please contact the respon sible vendor.
Fujitsu 19
To Next Page
Loading...
