Brief description of main bo ard Engl
ish - 3
Brief description of m ainboar
d
Information about boards
Be sure to observe the following for boards with ESD:
• You must always discharge static build up (e.g. by to uch ing a grounded object)
before working w ith the board.
• The equipment and tools you use must be free o f static charge.
• Remove the power plug from th e mains supply before inserting or removing
boards.
• Always hold boards by their edges.
• Never touch connector pins or conductors on the board.
An overview of the features is provided in the data sheet.
Special features
Your mainboard is ava ilable in different con figuration levels. Depending on the configuration,
your mainboard will be equipped with or provide support for certain features.
This manual describes the most important properties of this mainboard.
Additional information on mainboards is provided in the manual "Ba sic information on mainboard"
on the "User Documentation" or "OEM Mainboard" CD, or on th e Internet.
Fujitsu Technology Solutions 17
To Next Page
Loading...
