Installing/removing th e pro cesso r
English - 5
Installing/removing the proc
essor
Disconnect the system from the mains voltage before performing any of the tasks
described below. Details are contained in the operating manual of your system.
Technical data
• Socket LGA 1155, max. 95
W
• A current list of the processors s upported by this mainboard is available on the
Internet at: "
http://ts.fujitsu.com/mainb oards".
Never touch the underside of the processor. Even minor soiling such as grease
from the s kin can impair the processor’s o peration or destroy the processor.
Place the processor in the socket with extreme care, as the spring contacts
of the socket are very delicate and must not be bent.
If on e or m ore spring contacts are bent, on no account insert the processor a s it
may be dama ged by doing so. Please contact the responsible vendor.
Fujitsu Technology Solutions 19
To Next Page
Loading...
