Installing/removin g m ain memory En
glish - 7
Installing/removing main mem
ory
Tech nic al data
Technology
DDR3 1333/1600 MHz unbuffered DIMM modules 240 pin; 1.5 V;
64 bit, no ECC
Total size
1to16GbyteDDR3
Module size
1, 2, 4 or 8 GByte per module
A current list of the memory modules recommended fo r this mainboard is available
on the Internet at: "
http://www.fujitsu.com/fts/product s".
At least one memory module must be installed. Memory modules with different
memory capacities can be combined.
Only unbuffered DDR3 memory modules without ECC may be used.
DDR3 memory m odules must comply with the PC3-10600 or PC3-12800 speci fication.
Maximum system performance is achieved when identical memory modules
are used in Channel A and Channel B.
Depending on how th e syste m is configured, the visible main memory can be redu ced.
Channel A, Slot 1
Channel B, Slot 2
Number of mem ory modules inserted
Slot to be use
d
12
Channel A, Slot 1
xx
Channel B, Slot 2
x
The insta
llation/removal is described in the "Basic information on mainboard" manual.
Fujitsu 21