Brief description of mainboard Engl
ish - 3
Brief description of mainboar
d
Information about boards
Be sure to observe the following for boards with ESD:
• You must always discharge static build up (e .g. by touching a grounded object)
before working with the board.
• The equipment and tools y ou use must be free o f static charge.
• Remove the power plug from the mains supply before inserting or removing
boards.
• Always hold boards by their e dges.
• Never touch connector pins or conductors on the board.
An ove rview of the fe atures is provided in the data sheet.
Special features
Your mainboard is available in different configuration levels. Depending on the configuration,
your mainboard will be equipped with or provide support for certain features.
This manual describes the most important properties of this mainboard.
You can find more information on mainboards on the Internet at: "
http://www.fujitsu.com/fts/ produc ts".
Fujitsu 17
To Next Page
Loading...
Need help?
General
