Installing/removing main memory En
glish - 7
Installing/removing main mem
ory
Technical data
Technology
DDR4-2133/2400/2666 MHz unbuffered SO-DIMM modules; 260-pin;
1.2 V; 64 bit, without ECC
Total size
2 to 32 GB DDR4
Module size
2, 4, 8 or 16 GB per module
A current list of the memo ry modules re commended for this mainboard is available
on the Internet at: "
http://www.fujitsu.com/fts/products".
At least one memory mo dule must be installed. Memory m odules with different
memory capacities can be combined.
You m ust only u se unbuffered DDR4 memory modules.
DDR4 memory modules must comply with the DDR4-2133, DDR4-2400
or DDR4-2666 specification.
DDR4-2600 memory modules are downward compatible and are
operated depending on the CPU.
The maximum system performance is ensured when identical memory
modules are used in Channel A and Channel B.
Depending on how the syste m is configure d, the visible main memory can be reduced.
Channel A, Slot 1
Channel B, Slot 1
Number of memory modules inserted
Slot to be used 1 2
Channel A, slot 1
xx
Channel B, slot 2
x
The installation/removal is described in the "Basic i nformation on mainboard" manual.
Fujitsu 21
To Next Page
Loading...
Need help?
General
