39
Replacing a hard disk drive
1
1
1 Remove the screws of the hard disk drive you want to replace.
2 Take the new hard disk drive out of its packaging.
3 Make the required settings (e.g. master/slave, stand alone) on the drives.
4 Replace the hard disk drive.
5 Fasten the hard disk drive with the screws.
Replacing a hard disk drive
3
1
2
4
1 Connect the cables to the hard disk drive (1).
2 Insert the hard disk carrier in the guide rail provided for this purpose on the casing
(2, 3).
CHAPTER 4 Martini2 (27-44) 12/21/01, 10:16 AM39
To Next Page
Loading...
