Need help?Do you have a question about the Fujitsu DL3750+/3850+ and is the answer not in the manual?
Read manual carefully; incorrect use may cause injury or damage; Fujitsu Isotec disclaims liability for errors.
Product not intended for high-risk applications; consult sales rep for specialized use.
Provides guidelines for choosing an optimal and safe environment for the printer.
Step-by-step instructions for unboxing, inspecting, and putting the printer together.
Details on how to connect the printer to a power source and a computer.
Procedure for running the printer's self-test to check performance before computer connection.
Guides users on choosing the correct emulation for software compatibility.
Instructions for installing the necessary software driver for Windows environments.
Specifies recommended paper types, sizes, and thicknesses for optimal printing.
Step-by-step guide on how to access the printer's setup configuration menu.
Explains the purpose of each function available within the setup mode.
Guidance on selecting critical options for software and hardware compatibility.
How to configure print settings for MENU1 and MENU2 for different print jobs.
Configuration of printer hardware settings, including interfaces and buzzer.
Adjusting print alignment, top-of-form, and margins for precise paper placement.
Setting up printer parameters like tear-off behavior and autoloading.
Procedures for saving changes or exiting setup mode without saving.
How to restore factory or power-on default settings for the printer.
Identifies common issues like print quality, paper jams, errors, and failures with solutions.
Explains how to use SELF-TST, HEX-DUMP, and V-ALMNT for diagnosing printer issues.
To Next Page
General
