Why Fujitsu Printer does not turn on?
Your Fujitsu Printer may not turn on due to several reasons: a missing or incorrectly inserted battery (ensure it's inserted correctly), a discharged battery (charge the battery), the power switch not being pushed correctly (push it correctly), or an old battery (replace it with a new one).
What to do if my Fujitsu FTP-638WSL110 Printer does not print?
If your Fujitsu Printer is not printing, verify the following: ensure the power is on, the paper is correctly inserted, the paper cover is firmly closed, and there are no printer errors. Also, check if the thermal head is dirty and clean it if necessary.
What to do if Fujitsu Printer does not feed the paper or Paper jam occurs?
If your Fujitsu Printer is not feeding paper or a paper jam occurs, make sure the power is on, the paper is correctly inserted, and the paper cover is closed firmly. Also, check for any printer errors and correct them. If the platen roller is dirty, clean it.
Why Fujitsu FTP-638WSL110 battery does not charge or Charging error occurs?
A Fujitsu Printer battery may fail to charge or show a charging error due to several reasons: incorrect battery insertion (insert correctly), an old battery (replace it), incorrect AC adapter connection (connect correctly), unnecessary charging (if already fully charged), or incorrect operating temperature (charge at the correct temperature).
Why is my Fujitsu Printer printing is too light or Print is smudging?
If your Fujitsu Printer's print is too light or smudging, check if the paper is correctly inserted and the paper cover is closed firmly. Also, ensure the thermal head is clean, you're using the correct paper, and the battery isn't old (replace if necessary).
What causes Fujitsu Printer to not communicate?
If your Fujitsu Printer is not communicating, check if the power is on, and ensure you are using the correct application or driver. Verify the link is correctly connected and that the transmitter corresponds with the SPP profile. Radio interference from nearby equipment or shields can also cause communication issues; try removing the interference or shield.
Why does Fujitsu FTP-638WSL110 power supply cuts suddenly?
The Fujitsu Printer's power supply might cut off suddenly because the auto power off is set (this is normal), the battery charge is low (charge the battery), or an error has occurred (troubleshoot the error).
Why Fujitsu FTP-638WSL110 battery charge does not hold?
If the battery charge in your Fujitsu Printer doesn't hold, it might be old. Try exchanging it for a new battery.
Why is my Fujitsu FTP-638WSL110 printing slow?
The Fujitsu Printer might be printing slowly if the battery charge is low (charge the battery) or the battery is old (replace it). Also, a large amount of black ink or a low ambient temperature can cause printing to slow down, but this is not a malfunction.
This product is designed for general use, not for high safety applications, as serious danger may result.
Provides warnings and cautions for safe operation, covering environmental conditions, modifications, heating, water, impact, and electrical safety.
Lists cautions regarding use while driving, proximity to noise sources, environments, charging, cables, and power lines to prevent accidents and damage.
Provides warnings and cautions specific to the printer, including radio wave prohibition, touching hot parts, and avoiding moving parts.
Details warnings and cautions for battery usage, handling, and charging to prevent destruction, fire, or damage.
Lists warnings and cautions for AC adapter usage, connection, and charging to ensure safety and prevent damage.
Details common printer errors, their causes, and solutions, covering issues like paper, thermal head, supply voltage, hardware, and Bluetooth errors.
Addresses common power-related problems like the printer not turning on or battery charge errors, providing causes and solutions.
Covers problems with printer communication, such as failure to connect or radio interference, and suggests troubleshooting steps.
Helps resolve print problems like paper feed issues, paper jams, poor print quality, or smudging, by identifying causes and solutions.
General| Type | Thermal Printer |
|---|---|
| Print Method | Direct Thermal |
| Print Resolution | 8 dots/mm (203 dpi) |
| Resolution | 203 dpi |
| Paper Type | Thermal Paper |
| Paper Width | 80 mm |
| Interface | Serial |
| Power Supply | AC 100-240V |
To Next Page
