What to do if the ERROR lamp is lit and my Fujitsu FP-510 Printer doesn't work?
If the ERROR lamp is lit and your Fujitsu printer isn't working, it could be due to several reasons: * No paper is inserted: Insert paper into the printer. * The top cover is not completely closed: Ensure that the top cover is fully closed. * The thermal head is too hot: Wait for the thermal head temperature to decrease.
Why won't my Fujitsu FP-510 cut paper?
Your Fujitsu printer might not be cutting paper due to the following reasons: 1. The cutter blade may be damaged, worn, or has been used for too long. In this case, turn off the power and ask for repairs. 2. Paper fragments or foreign matter may be stuck around the cutter blade or paper chute. Remove any paper fragments or foreign matter. 3. Adhesive matter may be sticking to the cutter blade because of printing on label paper. Clean the cutter blade to remove the adhesive matter.
How to fix a Fujitsu FP-510 Printer that won't turn on?
If your Fujitsu printer doesn't turn on (the POWER lamp on the control panel does not light), check these: * The power cable might be disconnected: Connect the power cable. * The AC adapter connector might be disconnected: Connect the connector of the AC adapter.
What to do if cutter does not return to the correct position in Fujitsu Printer?
If the cutter in your Fujitsu printer doesn't return to the correct position, it's likely that paper fragments or other foreign matter is stuck around the cutter blade or paper chute. Remove any such obstructions.
Identifies the external parts and controls of the thermal printer.
Details the required AC adapter and its specifications.
Instructions for connecting the printer's interface cable.
Steps for connecting the AC adapter to the printer.
Step-by-step instructions for loading and replacing paper rolls.
Details error states and corresponding LED lamp patterns.
Advice on how to avoid paper jams.
Procedures for removing jammed paper.
Solutions for issues when the printer does not power on.
Troubleshooting steps for cutter malfunctions.
Diagnosing and resolving printing issues.
Steps for safely cleaning the thermal print head.
How to perform test prints to verify printer functionality.
General| Paper Handling | Roll paper |
|---|---|
| Print Technology | Thermal |
| Print Speed | 150 mm/s |
| Resolution | 203 dpi |
| Interface | Serial, Parallel |
To Next Page