22 / 125
No printer cable is provided with the product. Obtain a printer cable suitable for
the product interface. If you have any questions, consult your dealer. Before
connecting or disconnecting cables, make sure of the following:
1)The power to the printer and all other devices connected to the printer is
turned off.
2)The AC adapter power cable has been unplugged from the outlet.
3-1. Connecting Interface Cable
Open the connector cover at the rear of the printer by pulling it up, and connect the
interface cable to its rear connector socket. Close the cover after connecting the
cable.
Caution: If cables are arranged so that they extend from the rear or from the
rear on the right side, remove the inserts in the connector cover or
the cover with nippers or a similar tool. Unless the inserts are
removed in this case, the cables may be damaged and cause a
failure.
To Next Page
Loading...
Need help?
General