PRINTER AND PAPER SPECIFICATIONS
B-2
User's Manual
FUNCTIONAL
SPECIFICATIONS
Print method Impact dot matrix with a 0.2 mm, 24-wire
head
Print direction Bidirectional logic-seeking or unidirectional
seeking
Character cell Horizontal x vertical
Letter (10 cpi): 36 x 24 dots
Letter (12 cpi): 30 x 24 dots
Report: 18 x 24 dots
Draft: 12 x 24 dots
High-speed draft: 9 x 24 dots
Paper handling
Standard: Friction-feed platen (cut sheets)
Push tractors (rear feed of continuous forms)
Paper loading by LOAD button
Advancing perforations to tear-off edge by
TEAR OFF button
Parking continuous forms when using cut
sheets
Paper type 1-to 5-part side-glued or paper-stapled
fanfolded continuous forms or label sheets
with sprocket holes
1-to 5-part top-glued cut sheets and
envelopes
Paper size
80 columns 136 columns
Continuous Width: 102–267 mm 102-420mm
(4–10.5 in) (4-16.5 in)
Length: 102 mm (4 in) Same as left
or greater
Cut sheets Width: 102–267 mm 102-420mm
(4–10.5 in) (4-16.5 in)
Length: 76–364 mm 76-420 mm
(3–14.3 in) (3-16.5 in)
Paper thickness Up to 0.35 mm (0.014 inch)
To Next Page
Loading...
