Setup Mode
USING SETUP MODE
User's Manual 5-25
Quick
Reference
Introduc-
tion
Setting Up
Paper
Handling
Printing
Setup Mode
MENU1 and
MENU2 Items
Table 5.3 MENU1 and MENU2 Items and Options (Cont.)
NOTES:
• Underlined options are the factory defaults.
• Asterisks identify items and options that differ for the IBM XL24E and Epson
ESC/P2 emulations. The notes are defined at the end of the table.
Options Description
<DC3-CDE> ENABLE Enables the DC1 and DC3 codes.
(*4) Any data received between DC3 and
the next DC1 is ignored.
DISABLE Disables the DC1 and DC3 codes. These
codes are then ignored.
<CR-CODE>
CR ONLY No line feed is added to a carriage
return.
CR & LF A line feed is added to each carriage
return.
<LF-CODE> LF ONLY No carriage return is added to a line
(*3) feed.
LF & CR A carriage return is added to each line
feed.
To Next Page
Loading...
