Switching on for the first time: insta
lling the sof tw are
Switchingonforthefirst time:
installing the software
Installing,Software,Installing,
Once the installation ha s been started the device m ust n o t be switched
off, unless the installation has been completed.
During installation, the device may only be rebooted when you are requested to do so!
The installation will otherwise not be carried out correctly and the contents
of the hard disk must be completely restored.
If the device is integrated into a network, the user and server details as well as
the network protoco l are required during the software installation.
Contact your network ad ministrator i f you have any questions abou t these s ettings.
When you switch on the device for the first time, the supplied software
is installed and configured. Plan a reasonable amount of time for this,
as this process m ust not be interrupted.
Switch on the monitor and the machine
► Switch on the monitor (see operating instructions for the monitor).
► Press the ON/OFF switch (1) on the
front of the device.
The operational display will light up
and the machine will start.
Installing the software
► During installation, follow the on-screen instructions.
Softwar
e,
Install
ing,
► If anything is unclear regarding the data you are asked to input, read the
online Help in your operating system.
You will find more information on the system, as well as drivers, utilities
and updates on th e optional "Drivers & Utilities" DVD and on the
Internet at "
http://www.fujitsu.com/fts/support".
You can find information and help on the Windows operating system functions
on the Internet at "
http://windows.microsoft.com".
Fujitsu 21
To Next Page
Loading...
