Safety Precautions
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide (Power Synchronized Unit)
Copyright 2017 FUJITSU LIMITED P3AM-8012-10ENZ0
11
■ Handling the power synchronized unit
• Do not place the power synchronized unit in areas with strong magnetic fields,
such as in the vicinity of TVs or speakers. Doing so may damage the power
synchronized unit and cause the power synchronized unit to malfunction.
• Do not place power cords and other cables in locations where they may
become trip hazards. Doing so may cause injury or damage the power
synchronized unit .
• Do not place the power synchronized unit on a slanted or unstable surface or
in areas that tend to shake. Doing so may cause it to tip over and injure
others. Also, do not place the power synchronized unit in high traffic areas
such as in a hallway. Passersby can shake the unit, damage it or cause mal-
function.
• Place the power synchronized unit in an environment in which the
temperature and humidity satisfy the environmental conditions described in
"1.3
Specifications" (page 23).
- For 24-hour operation, ensure that the schedule for air conditioning is able
to maintain the required temperature. Failure to do so may result in
damage to the device.
- During the winter, control the heating system to limit ambient
temperature rises to less than 15C per hour to prevent condensation.
Failure to do so could lead to electric shock and damage the power
synchronized unit.
• Do not attempt to repair, disassemble, or remodel the power synchronized
unit by yourself. Doing so may cause electric shock or fire.
• Do not use a voltage other than that indicated. Doing so may cause electric
shock or fire.
To Next Page
Loading...
Need help?
General