Fujitsu Eternus DX80 S2 - Specific Settings; Setting the CA Reset Groups

2.2 Specific Settings
Specific settings for the OS and connection configuration are not required.
2.2.1 Setting the CA Reset Groups
Because all of the ports are configured to be members of one CA reset group in the initial setting, the reset
group settings do not need to be changed.
Chapter 2 Setting Up the ETERNUS DX
2.2 Specific Settings
11
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
Copyright 2014 FUJITSU LIMITED
P3AM-5352-11ENZ0