Fujitsu Eternus DX90 S2 - Page 6

Shipment Date Revision
Document Part Number
PDF HTML
May 2014 1.2 B1FW-6005-01ENZ0(02) B1FW-6005-01ENZ2(02)
June 2014 2 B1FW-6005-02ENZ0(00) B1FW-6005-02ENZ2(00)
July 2014 2.1 B1FW-6005-02ENZ0(01) B1FW-6005-02ENZ2(01)
January 2015 3 B1FW-6005-03ENZ0(00) B1FW-6005-03ENZ2(00)
March 2015 3.1 B1FW-6005-03ENZ0(01) B1FW-6005-03ENZ2(01)
Notes
- No part of this manual may be reproduced without permission.
- This manual is subject to change without advance notice.
Copyright
Copyright 2013-2015 FUJITSU LIMITED
Update History
Content of Update Updated Section Revision
Notes when creating a NAS interface are added. 4.6.3.2 1.1
Notes when setting up an authentication server are added. 4.6.3.3
The access method by CIFS protocol is changed. 4.6.4
The information related to ETERNUS DX200F is described. "Others" in Preface,
4.1.7, 4.1.8, 4.2.1.1,
4.6, 4.6.1.3
1.2
Modified screen names in the ETERNUS GUI 3.1 2
Added Wizard startup method description 3.6
Added Notes for ETERNUS Disk storage systems 4.1.1
Notes are added and changed. 4.1.4, 4.1.5, 4.1.7
Added DX200F information 4.2.1, A.4
Updated the Web Console graphics 4.3.1
Function is added to the NAS management. 4.6
Removed SymfoWARE description 5.1.3.1, 5.1.3.2
Port numbers used in Express is deleted. 5.1.3.1, 5.2.3.1
Updated the Eco mode description A.4
Note is added. 4.6 2.1
The number of NAS volumes and NAS backup volumes creatable on one ETERNUS Disk
storage system is changed.
4.6.1.2.1
Note is added when data inconsistency is found in a snapshot. 4.6.1.3.1, 4.6.4.12
Point is added to "NAS Environment Quota Management". 4.6.1.4.1
Point is added to "Events Notified by Quota Management". 4.6.1.4.2
Note is added to "Registration of User/Group". 4.6.2.2
- v -