When a target ETERNUS Disk storage system has already been registered to this product, and when application of the addition of
the NAS option has been performed with "4.6.2.1 ETERNUS Disk Storage System Configuration", perform the Reload Conf. operation
for the ETERNUS Disk storage system.
Note
When using the snapshot function or quota management function, enable SNMP Trap Setup when you register devices. If SNMP
Trap Setup is not enabled, snapshot collection result and an alarm output when a quota threshold is exceeded are not notified.
See
Refer to "Reload ETERNUS Disk Storage System Configuration Information" in the
ETERNUS SF Web Console Guide
for information
on how to perform the Reload Conf. operation.
License Registration
Register the ETERNUS Disk storage system NAS license, and any other required license that is not already registered.
Refer to required licenses (software) of the "4.6.1.6 Operating Environment" for required and optional licenses.
Skip this work if the license of the object has already been registered in this product.
See
Refer to "Register License" in the
ETERNUS SF Web Console Guide
for information on how to register the license.
Creating Thin Provisioning Pool
A Thin Provisioning Pool in which the NAS volume is created will be created.
Skip this work if the Thin Provisioning Pool for the NAS volume has already been made.
See
Refer to "Create Thin Provisioning Pool" in the
ETERNUS SF Web Console Guide
for information on how to create a Thin Provisioning
Pool.
Information
For increased reliability, it is recommended to create the primary NAS volume and the backup NAS volume in separate Thin
Provisioning Pools. When performing NAS volume backup, create two Thin Provisioning Pools; one for the primary NAS volume
and one for the backup NAS volume.
Configuration of Connection Type of Advanced Copy
Configure the access connection type for Advanced Copy in order to define the NAS volume backup.
Skip this work if the backup is not being used for NAS environment or if the connection has been configured already.
See
Refer to "Configure Connection Type for ETERNUS Disk Storage System" in the
ETERNUS SF Web Console Guide
for information on
how to perform the configuration.
- 46 -
To Next Page
Loading...
