Fujitsu Eternus DX90 S2 - Latest Information; Related Manuals

4
ETERNUS DX80 S2/DX90 S2 Disk storage system Read Me First
Copyright 2013 FUJITSU LIMITED
P3AM-4872-11EN
Drive Enclosure (2.5inch) (Product ID: ETCAD
a
CU, ETEAD
a
CU
(*1)
)
Drive Enclosure (3.5inch) (Product ID: ETCAD
a
DU, ETEAD
a
DU
(*1)
)
□
Rack rail kit
□
Rack rail (x 1 set)
□
Bracket (x 2)
□
Plate (x 2)
□
Washer (x 8)
□
M5 screw (x 4)
for mounting the enclosure
□
M5 screw (x 8)
for attaching the rack rails
□
AC200V cable (x 2)
IEC60320-C13↔NEMA L6-15P (4m)
□
QSFP cable
QSFP↔QSFP (0.75m)
One QSFP cable is provided when
a
for the product ID is "1".
Two QSFP cables are provided when
a
for the product ID is "2".
□
Flange cover (x 1)
□
Drive enclosure (x 1)
Drives that are purchased at the same time as the ETERNUS DX Disk
storage system are preinstalled according to the installation rules.
●
2.5inch
●
3.5inch
*1: An alphanumerical character is used for
a
to indicate the number of I/O modules.
1 : one I/O module
2 : two I/O modules