3
ETERNUS DX80 S2/DX90 S2 Disk storage system Read Me First
Copyright 2013 FUJITSU LIMITED
P3AM-4872-11EN
Check the list of package contents for the purchased product to confirm that no items are missing. Tick off the checkbox of each
confirmed item.
If there is a missing item, contact your sales representative.
●
Store the package contents in a safe and secure location, as they may be needed again when making changes to the system or
reinstalling the software.
●
Note that the package may sometimes also contain an Errata sheet and/or other such unlisted documentation.
ETERNUS DX80 S2 (2.5inch) (Product ID: ET082
a
C
b
U
(*1)
)
ETERNUS DX80 S2 (3.5inch) (Product ID: ET082
a
D
b
U
(*1)
)
ETERNUS DX90 S2 (2.5inch) (Product ID: ET092
a
C
b
U
(*1)
)
ETERNUS DX90 S2 (3.5inch) (Product ID: ET092
a
D
b
U
(*1)
)
Package Contents
□
Controller enclosure (x 1)
Drives that are purchased at the same time as the ETERNUS DX Disk
storage system are preinstalled according to the installation rules.
●
2.5inch
●
3.5inch
□
Pin (x 1)
Used to push the FUNCTION button of the controller
enclosure.
□
Flange cover (x 1)
□
Rack rail kit
□
Rack rail (x 1 set)
□
Bracket (x 2)
□
Plate (x 2)
□
Washer (x 8)
□
M5 screw (x 4)
for mounting the enclosure
□
M5 screw (x 8)
for attaching the rack rails
□
Read Me First (this document) (x 1)
□
Safety Precautions (x 1)
□
Documentation CD (x 1)
:
: . . .
: . . .
:
□
Network Settings label (x 1)
□
DE_No. label (x 1)
□
Label
□
Destination label (x 1)
for the QSFP cable
□
AC200V cable (x 2)
IEC60320-C13↔NEMA L6-15P (4m)
*1: An alphanumerical character is used for
a
to indicate the ETERNUS DX Disk storage system model.
D : dual-controller type
S : single-controller type
An alphanumerical character may also be used for
b
depending on the purchased product.
To Next Page
Loading...
