Fujitsu fi-4340C Cleaning And Maintenance

1
● 7
Panel Display
■ Counter Display
The displays for the Paper and Abrasion counters are shown below:
Simultaneously press the and arrow buttons for at least 1 second, to switch to Life counter panel
display as shown below:The scanner is provided with a counter display.
NOTE
When the counter value is 0, no number is displayed.
Counter Function
Paper counter
When the
button is pressed for
at least 1 second
The paper counter counts the number of scanned sheets from
the start of reading until Paper Empty or an error is detected.
The counter is automatically reset at the start of reading. The
counter is used for checking the number of sheets scanned at
one batch.
When the
button is pressed for
at least 1 second
This counter increments each time a document is scanned. It is
not initialized until the power is turned off. The counter can be
used, for example, for checking the number of sheets that have
been scanned in one day.
Abrasion
counter
The abrasion counter counts the accumulated number of scanned sheets. This counter
increments at every 10 sheets. It is useful to check the cleaning cycle or the parts
replacement cycle. How to reset is described in "Operator’s Guide".
Life Counter Keeps a cumulative count of the number of scans made after shipping.
This counter increments by 1 after every 10 scans and may be used to estimate of the
device's remaining scan life.
Re a d
y
XXXXX0
XXX
X
>
Paper counter
Abrasion counter
Read
y
*
XXXXXX0
>
Life counter

Fujitsu fi-4340C Specifications

General

Brand	Fujitsu
Model	fi-4340C
Category	Scanner
Language	English