Fujitsu fi-6400 - Installing the Scanner; Connecting the Cables

4
■ Installation (Recommended)
The following software are installed:
 PaperStream IP (TWAIN) Driver
 Software Operation Panel
 Error Recovery Guide
 PaperStream Capture
 Manual
 Scanner Central Admin Agent
 fi Series Online Update
1. Turn on the computer and log onto
Windows
®
as a user with Administrator
privileges.
2. Insert the Setup DVD-ROM into the DVD
drive.
 The [fi Series Setup] screen appears.
3. Click the scanner model (if a window for
selecting the scanner model appears).
4. Click the [INSTALL (Recommended)]
button.
5. Follow the instructions on the screen to
proceed with the installation.
■ Installation (Custom)
1. Perform steps 1. to 3. in "Installation
(Recommended)" (page 4).
2. Click the [Installation (Custom)] button.
3. Select the check box for the software to
install and click the [Next] button.
4. Follow the instructions on the screen to
proceed with the installation.
Installing the Scanner
Place the scanner at its installation site.
Connecting the Cables
The following describes how to connect the cables
between the scanner and your computer.
If the [fi Series Setup] screen does not
appear, double-click "Setup.exe" in
the Setup DVD-ROM via Windows
Explorer or [Computer].
The scanner weight is 32 kg (70.56 lb).
You must not carry it alone.
Carry the scanner by supporting it from
the bottom.
350
3
35
5
0
350
1630
860
430430
460
460
(12.20)(12.20)
310
460
460
(33.86)
(18.11)
(64.17)
430
(16.93)
394
(15.51)
Scanner’s Dimensions
Installation Space
Unit: mm (in.)
1
2
3
SCSI ID (fi-6800)
USB Connector
SCSI Connector (fi-6800)
SCSI Cable
(fi-6800)
USB Cable
Power Cable