Fujitsu fi-7280 - User Manual

Explains how to configure settings in the
Software Operation Panel.
Explains about troubleshooting.
Explains how to replace the consumables.
Explains how to clean the scanner.
Explains about various ways of scanning.
Explains how to use the Operator Panel.
Explains about the setting items in the
scanner drivers.
Explains how to load documents on the
scanner.
Explains the names and functions of parts
and basic scanner operation.
fi-7160/fi-7260/fi-7180/fi-7280
Appendix
Glossary
Contents
TOP
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
P3PC-4292-01ENZ0
Scanner
Overview
How to Use This Manual
Index
Introduction
Operator's Guide
Thank you for purchasing our image scanner.
This manual explains about the basic operations and handling of the scanner.
For information on scanner installation, connection and software installation,
refer to "Getting Started".

Fujitsu fi-7280 Specifications

General

Brand	Fujitsu
Model	fi-7280
Category	Scanner
Language	English

Summary

Chapter 1 Scanner Overview

1.1 Main Features

Explains the product's key capabilities and advantages.

1.2 Parts and Functions

Details the names and functions of scanner components.

1.9 Basic Flow of Scanning Operation

Outlines the standard procedure for performing a scan.

Chapter 2 How to Load Documents

2.1 Loading Documents in the ADF

Provides instructions for loading documents into the automatic document feeder.

2.2 Loading Documents on the Flatbed (fi-7260;fi-7280)

Explains how to load documents on the flatbed for specific models.

2.3 Documents for Scanning (ADF)

Specifies the types and conditions of documents suitable for ADF scanning.

Chapter 3 Configuring the Scan Settings

3.1 Setup Dialog Box for PaperStream IP Driver

Describes the main dialog box for configuring scanner settings.

3.2 Setting Items for PaperStream IP Driver

Details the various setting items available in the driver.

Chapter 4 How to Use the Operator Panel

4.1 Operator Panel

Details the components and functions of the scanner's operator panel.

4.2 Settings Menu

Explains how to access and use the scanner's operational settings menu.

Chapter 5 Various Ways to Scan

5.2 Scanning Documents of Different Types and Sizes

Covers scanning various document types and sizes, including mixed batches.

5.3 Advanced Scanning

Introduces advanced scanning methods like manual feeding.

Chapter 6 Daily Care

6.1 Cleaning Materials and Locations that Require Cleaning

Lists recommended cleaning materials and parts needing cleaning.

6.3 Cleaning the Inside

Provides detailed instructions for cleaning the scanner's internal components.

Chapter 7 Replacing the Consumables

7.1 Consumables and Replacement Cycles

Identifies consumable parts and their suggested replacement cycles.

7.2 Replacing the Brake Roller

Step-by-step guide for replacing the brake roller.

7.3 Replacing the Pick Roller

Step-by-step guide for replacing the pick roller.

Chapter 8 Troubleshooting

8.1 Paper Jam

Instructions for resolving paper jam errors.

8.2 Error Indications on Operator Panel

Explains how to interpret error codes displayed on the scanner.

8.3 Troubleshooting

Provides solutions for common scanner problems.

Chapter 9 Operational Settings

9.1 Starting Up the Software Operation Panel

Instructions to launch the software for configuring settings.

9.3 Configuration Items

Lists and describes various settings configurable via the Software Operation Panel.

9.6 Settings Related to Multifeed Detection

Details how to configure multifeed detection methods.

Appendix

A.1 Basic Specification

Provides technical specifications for the scanner models.

A.2 Installation Specification

Details installation requirements and environmental conditions.

Glossary