Fujitsu fi-7280 - Indications on LCD; Consumables; Daily Care; Operator Panel

Chapter 4 How to Use the Operator Panel
Appendix
Glossary
Introduction
Index
Contents
TOP
63
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Configuring the
Scan Settings
Indications on LCD
ATTENTION
Do not use the operator panel while the Software Operation Panel is
running.
HINT
The LCD angle can be adjusted by lifting it up towards you to make the
contents of the screen more visible.
Display Description
Processing initialization.
Ready to start scanning.
Indicates that the
initialization was
successfully completed.
For more details about the
indicators, refer to
"Indicator" (page 65).
An item from the menu can
be selected.
When you press the [Menu]
button while the [Ready]
screen is displayed, the
[Settings Menu] screen is
displayed.
The Settings Menu can be
used to configure various
operational settings upon
scanning.
For details about the
Settings Menu screen,
refer to "4.2 Settings Menu"
(page 66).
Title
Counter
Indicator
Title
Items