Chapter 9 Operational Settings
Appendix
Glossary
Introduction
Index
Contents
TOP
166
How to Load
Documents
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Replacing the
Consumables
Scanner
Overview
Operational
Settings
Clearing [View Only mode]
Clear [View Only mode] in the following procedure.
1 Right-click the Software Operation Panel icon in the
notification area, and select [View Only mode] from the
menu.
The [Password setting] dialog box appears.
2 Enter the current password and click the [OK] button.
[View Only mode] is cleared, and the scanner settings can now be
changed.
HINT
When you exit [View Only mode], the check mark next to [View
Only mode] disappears from the menu that is displayed by right-
clicking the Software Operation Panel icon in the notification area.
To Next Page
Loading...
