Fujitsu fi-7280 - 2.2 Loading Documents on the Flatbed (fi-7260;fi-7280)

Contents
Index
Chapter 2 How to Load Documents
Appendix
Glossary
Introduction
TOP
44
Configuring the
Scan Settings
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
How to Load
Documents
1 Open the document cover.
For details, refer to "1.5 Opening/Closing the Document Cover (fi-
7260/fi-7280)" (page 28).
2 Load a document on the document bed.
Place the document face-down to align its top left-hand corner with
the reference point.
3 Close the document cover.
For details, refer to "1.5 Opening/Closing the Document Cover (fi-
7260/fi-7280)" (page 28).
4 Scan the document with the image scanning application.
For details, refer to the image scanning application manual.
2.2 Loading Documents on the Flatbed (fi-7260/fi-7280)
ABC
ABC
AB
Reference
point