Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Index
Contents
TOP
107
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing the
Consumables
Scanner
Overview
Various Ways to
Scan
Configuring the
Scan Settings
How to Use the
Operator Panel
4 Press the [Menu] button and confirm that the LCD
displays [Disable], and then either press the [Scan/Enter]
button or perform a scan from the computer.
From this point, note that the indication on the LCD switches between
[Enable][Disable] every time you press the [Menu] button. When
[Disable] is displayed, the next document is scanned with paper
protection disabled. After that, the subsequent documents are
scanned according to the paper protection setting of either scanner
driver, Software Operation Panel, or operator panel.
HINT
If paper protection is set off frequently, refer to "Paper protection is
set off frequently." (page 150).
To Next Page
Loading...
