fi-7480 / fi-7460 CONSUMABLE REPLACEMENT AND CLEANING INSTRUCTIONS
10
CLEANING INSTRUCTIONS
The following table shows the specifications of consumables and their standard replacement cycle. It is
recommended that you stock extra consumables before the ones in the scanner reach the end of their
service life. The consumables must be replaced periodically. You can check the number of scanned
pages for the Brake roller unit and the Pick roller unit by referring to each counter on this scanner.
Description Qty Life Fujitsu P/N
Pick Rollers (2) 1 200,000 PA03710-0001
Brake Roller 1 200,000 PA03670-0002
Note: Replacement Cycles are estimated guidelines established by testing with A4/Letter sized wood free
and wood based 17 lb. paper. NCR or Carbonless paper has chemical composition which damages the
pad and the pick roller. Cleaning of the consumables will be required more frequently to avoid feed
problems. Consumable life will be reduced if NCR or Carbonless paper is scanned.
To Next Page
Loading...
Need help?
General