Fujitsu FP-510II - Page 122

121 / 125
No.
Item
Explanation
Detail setup item
11
BM SENSOR
- Specifies whether the BM sensor has been
installed.
Set "INSTALLED" only when the BM sensor
has been installed.
(This item is valid only for a device
specified to have the BM sensor installed.)
INSTALLED
UNINSTALLED
12
BM CHEK WITH
CUT
- Specifies the cut operation initiated by the
BM sensor.
This setting is effective only when
"INSTALLED" has been set for BM SENSOR.
(This item is valid only for a device specified to
have the BM sensor installed.)
ENABLE
DISABLE
13
BUZZER
- Specifies whether to sound the buzzer at error
occurrence.
The buzzer can be sounded by a command even if
"DISABLE" is specified. (This item is valid only
for a device specified to have a buzzer installed.)
DISABLE
ENABLE
14
AUTO LOGO PRINT
* only FP-510II
- It is set whether to print the automatic print logo.
ENABLE
DISABLE
15
BT
AUTOCONNECT(iOS)
*4
-
When the communication between the high-order
device equipped with iOS and the printer is
disconnected in the Bluetooth interface, the "BT
AUTOCONNECT
(iOS)" item which specifies
e
nabling/disabling of the function which
performs the automatic reconnection from the
printer.
ENABLE
DISABLE
16
RETURN TO UP
- Returns to the selection mode for the setup group
items.
-
17
RETURN TO
SETUP MENU
- Returns to the setup mode menu.
-
*4 This is displayed in the case of Bluetooth and USB interface model.