58 / 125
Using the cleaning sheet or a similar material, wipe off the adhesive matter
adhering to the Lower cutter.
Caution: Although the edge of the Lower cutter is not as sharp as the
edges of utility knives generally used in offices, there is a risk of
injury to a finger that is moved while pressed directly against
the edge of the cutter.
(5) After completing cleaning, reposition the roll paper, and close the
Top cover.
Warning: Be careful when the printer is in cutter cleaning mode, because
the Upper cutter is exposed. After completing cleaning,
reposition the roll paper, and close the Top cover.
cutter
To Next Page
Loading...
